Installing Your New Appliance; Ventilation Of Appliance - Hisense HBC54D6AS Manual Del Usuario

Installing your new appliance

Before using the appliance for the first time, you
should be informed of the following tips.

VENTILATION OF APPLIANCE

In order to improve efficiency of the cooling
system and save energy, it is necessary to maintain
good ventilation around the appliance for the
dissipation of heat.
For this reason, sufficient clear space should be
available around the product.
Suggest: It is advisable for there to be at least l/2
inch of space from the back to the wall, at least l/2
inch from its top, and at least l/4 inch from its side
to the wall. As shown in the following diagrams.
Note:
•Avoid locating the appliance in damp areas .Too
much moisture in the air will cause frost to form
quickly on the evaporator.
•Keep the appliance out of direct sunlight, rain or
frost. Position the product away from heat sources
such as stoves, fires or heaters.
•Position your appliance in a dry place to avoid
high moisture.
Leveling Of Appliance
The appliance should be level in order to eliminate
vibration. We recommend that you level the appliance
by the following steps.
1. Put the appliance into the right place.
2. Turn the adjustable feet (with your fingers or a
suitable screw driver) until they touch the floor.
3. Tilt back the top backwards for about 10-15mm or
1 ° by turn the adjustable feet. This will allow the doors
to self-close providing a consistent closed seal.
Cabinet leg
Electrical Connection
Caution! Any electrical work required to install this
appliance should be carried out by a qualified
person or authorized service technician.
WARNING
This appliance must be grounded. The
manufacturer declines any liability should
these safety measures not be observed.
Cabinet leg
6