Publicidad
Idiomas disponibles
Idiomas disponibles
2.16.1
2.16.1
2.16.1
Installing Windows
Installing Windows
Installing Windows
2.16.1
2.16.1
Installing Windows
Installing Windows
RAID F
RAID F
RAID Functions
RAID F
RAID F
If you want to install Windows
SATA / SATAII HDDs with RAID functions, please follow below steps.
STEP 1: Make a SATA / SATAII Driver Diskette.
A.
Insert the ASRock Support CD into your optical drive to boot your system.
B.
During POST at the beginning of system boot-up, press <F11> key, and
then a window for boot devices selection appears. Please select CD-ROM
as the boot device.
C.
When you see the message on the screen, "Generate Serial ATA driver
diskette [YN]?", press <Y>.
D.
Then you will see these messages,
Please insert a blank
formatted diskette into floppy
drive A:
press any key to start
Please insert a floppy diskette into the floppy drive, and press any key.
E.
The system will start to format the floppy diskette and copy SATA / SATAII
drivers into the floppy diskette.
STEP 2: Set Up BIOS.
A.
Enter BIOS SETUP UTILITY
B.
Set the "SATA Operation Mode" option to [RAID].
STEP 3: Use "RAID Installation Guide" to set RAID configuration.
Before you start to configure RAID function, you need to check the RAID installation
guide in the Support CD for proper configuration. Please refer to the BIOS RAID
installation guide in the following path in the Support CD:
.. \ RAID Installation Guide
STEP 4: Install Windows
your system.
After step1, 2, 3, you can start to install Windows
64-bit OS on your system. At the beginning of Windows
third-party RAID driver. When prompted, insert the SATA / SATAII driver diskette contain-
ing the NVIDIA
®
RAID driver. After reading the floppy disk, the driver will be presented.
Select the driver to install according to the mode you choose and the OS you install.
NOTE. If you install Windows
HDDs and want to manage (create, convert, delete, or rebuild) RAID functions
on SATA / SATAII HDDs, you still need to set up "SATA Operation Mode" to [RAID] in
BIOS first. Then, please set the RAID configuration by using the Windows RAID
installation guide in the following path in the Support CD:
.. \ RAID Installation Guide
3 4
3 4
3 4
3 4
3 4
ASRock Penryn1600SLIX3-WiFi Motherboard
2000 / XP / XP 64-bit With
2000 / XP / XP 64-bit With
2000 / XP / XP 64-bit With
2000 / XP / XP 64-bit With
2000 / XP / XP 64-bit With
®
unctions
unctions
unctions
unctions
®
®
2000, Windows
XP or Windows
Advanced screen
®
2000 / Windows
®
XP / Windows
®
2000 / Windows
®
®
2000 / Windows
XP / Windows
®
XP 64-bit on your
IDE Configuration.
®
XP 64-bit OS on
®
®
XP / Windows
XP
®
setup, press F6 to install a
®
XP 64-bit on IDE
Publicidad
