Tripp-Lite SmartRack SRCLOSETFAN Manual Del Propietário página 3

Ventilador de descarga para gabinete de cableado
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Mounting
Notes:
• This product should only be installed by someone of good mechanical ability, with basic building experience and a full understanding of this instruction
manual.
• Installers are responsible for providing appropriate installation hardware for the mounting surface.
• Make sure that the mounting surface can safely support the combined load of the equipment and all attached hardware and components.
These instructions show an installation in which the fans draw in cool air from the outside. For installations in which
the fans pull warm air out from the inside, install the bracket on the inside of the wall and the fan on the outside of
the wall.
1
If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs.
The use of a stud finder is highly recommended.
OUTSIDE
3
If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs.
The use of a stud finder is highly recommended.
5
19-10-070-9339A9.indb 3
OR
INSIDE
OUTSIDE
2
4
6
3
INSIDE
INSIDE
12/5/2019 2:42:12 PM

Publicidad

Tabla de contenido
loading

Tabla de contenido