5. Set the time by touching the slider control (e.g. "2"), now the timer you set is
25 minutes.
6. When the time is set, it will begin to count down immediately. The display will show
the remaining time.
Note: There will be a red dot in the right bottom corner of the power level indication
which is indicating that the zone is selected.
7.
When cooking timer expires, the corresponding cooking zone will be switch off
automatically.
Note: Other cooking zones that were switched on before the timer was set will keep
operating.
If the timer is set on more than one zone:
1. When you set the timer for several cooking zones, red dots of the relevant cooking
zones are indicated. The timer display shows the minute timer. The dot of the
corresponding zone blinks.
(set to 15 minutes)
(set to 25 minutes)
EN
57