Troubleshooting - Klarstein Virtuosa EcoAdapt Manual De Instrucciones

EN
62
What? How?
Spillovers on the 1. Switch the power to the
touch controls
2. Soak up the spill.
3. Wipe the touch control
4. Wipe the area
5. Switch the power to the

TROUBLESHOOTING

Problem Possible causes
The cooktop No power.
cannot be turned
on.
The touch controls The controls are locked.
are unresponsive.
The touch controls There may be a slight film of
are difficult to water over the controls or
operate. you may be using the tip of
your finger when touching
the controls.
The glass is being Rough-edged cookware.
scratched. Unsuitable, abrasive scourer
or cleaning products being
used.
cooktop off.
area with a clean damp
sponge or cloth.
completely dry with a
paper towel.
cooktop back on.
Important!
• The cooktop may beep
and turn itself off, and
the touch controls may
not function while there is
liquid on them. Make sure
you wipe the touch control
area dry before turning
the cooktop back on.
What to do
Make sure the cooktop is
connected to the power
supply and that it is switched
on. Check whether there is a
power outage in your home
or area. If you've checked
everything and the problem
persists, call a qualified
technician.
Unlock the controls.
Make sure the touch control
area is dry and use the ball of
your finger when touching the
controls.
Use cookware with flat and
smooth bases (see "Choosing
the right Cookware" section).
Do not use scouring pads or
scouring agents for cleaning
(see "Care and Cleaning"
section).