Sunstech FRDP3 Manual Del Usuario página 10

2. In the alarm setting mode, press the ALARM 1 or ALARM 2 repeatedly to cycle
through the setting options:
Alarm time > Alarm sound source > Alarm frequency
•
Setting alarm time: Press the BACKWARD to set the hour time and FORWARD
button to set the minute time.
•
Setting alarm sound source: Press the BACKWARD or FORWARD button to
select the alarm or radio as the alarm sound source. The corresponding alarm
indicator will turn on according to your selection.
•
Setting alarm frequency: Press the BACKWARD or FORWARD button to select
an alarm frequency (1-5 = Monday to Friday, 1-7 = Everyday, 6-7 = Weekend
only).
Once the alarm setting is done, the alarm will be automatically activated with the
corresponding alarm indicator (alarm or radio) switched on.
Turning the alarms on or off
When the clock time is displayed, press and hold the ALARM 1 or ALARM 2 button
to enable or disable the respective alarm. The corresponding Alarm 1 or Alarm 2
indicator (alarm or radio) will switch on when the alarm is enabled.
Deactivating a sounding alarm
• Press any ALARM OFF button to switch off a sounding alarm.
• When the alarm sounds, the corresponding Alarm 1 or Alarm 2 indicator (alarm
or radio) flashes on the display.
**For one day alarm setting, just set the desired alarm time one day before.
Press any ALARM OFF button to switch off the alarm. After having switched off the
alarm, press the ALARM button again to clear the alarm setting (the alarm indicator
will be switched off ).
To set another one day alarm, just repeat the above steps.
Snooze
• To temporarily silence a sounding alarm, press the SNOOZE button. The alarm
will sound again when the snooze period (9 minutes) is over.
• The corresponding Alarm 1 or Alarm 2 indicator (alarm or radio) flashes on the
display during the snooze period.
• To cancel the snooze period and the alarm, press any ALARM OFF.
Sleep
• This sleep function defines the duration of time before the radio switches itself
off automatically.
• When the radio is switched on, press the SLEEP button repeatedly to select a
9