Scope Of Delivery - Abicor Binzel CAT2 Traducción Del Manual De Instrucciones Original

CAT2

4 Scope of delivery

• CAT2 robot mount
Accessories kit:
• Connecting cable
• 4 cylinder screws M4x10
Option:
Accessories:
Tab. 10 Scope of delivery
4.1 Transport
Checking procedure
on receipt of goods
In case of damage
In case of complaints If the goods have been damaged during transport, contact the last carrier
Packaging for
returning the goods
Tab. 11 Transport
4.2 Storage
The standard scope of delivery includes the following components:
• Operating instructions
• Dowel screw M8 with washer and nut
• Dowel screw M6 with washer and nut
• 4 protection caps
• Mount
• TCP alignment jig to check the adjusted TCP in the extension of
the Z axis of the robot with built-on welding torch
• Tools for spring change
Order the equipment parts and wear parts separately. Order data and part
numbers for the equipment parts and wear parts can be found in the current
ABICOR BINZEL spare parts and wear parts lists. The contact for consulting
and ordering can be found in the Internet at www.binzel-abicor.com.
The components are carefully checked and packaged, however damage may
occur during shipping.
Make sure that the shipment is complete by referring to the delivery note!
Check the package and components for damage (visual inspection)!
immediately! Keep the packaging for possible checks by the carrier.
Use the original packaging and the original packaging material. If you have
questions concerning the packaging and safety during shipment, please
consult your supplier.
Physical storage conditions in a closed room:
 2.3 Technical Data on page EN-4
4 Scope of delivery
EN - 9