Rosenbauer HEROS Titan Pro Información Para El Usuario página 11

After adjustment to the right position, both screws left and right must be securely
fastened again to ensure the safety function of these elements
2.2.4 Visor adjustment
The integrated visor should be pulled down until it locks. No intermediate position is
allowed. The visor is pushed up in the reverse sequence, but is first secure when tangible
locking occurs.
1/2
1/2
The optional eye protection visor is pulled down until it locks using both lateral levers.
It is pushed up in the reverse sequence, but is first secure when tangible locking
occurs.
IMPORTANT: Protection of the visor is only provided in the final position (end locking,
no intermediate position).
IMPORTANT: The eye protector (optional) should be moved only by using both levers
(left and right) smoothly. Otherwise the visors can be scratch-damaged.
These kinds of damages are NO warranty claim!
2.3 Doffing your protective helmet
a) Helmet is not contaminated after use:
∙ Remove the helmet in reverse order from that described above for donning the
helmet.
∙ Inspect each item of the helmet assembly for any damage or change in
condition.
∙ Any damage or change in condition must be corrected before the helmet is
used again.
∙ Clean and store the helmet as recommended under „Maintenance".
b) Helmet is contaminated after use:
Protective helmets contaminated with blood, bodily fluids, toxins, radioactivity,
HEROS Titan Pro – Rosenbauer
EN
11