Rosenbauer HEROS Titan Pro Información Para El Usuario página 8

Rosenbauer – HEROS Titan Pro
feel heat you can be burned or injured suddenly and without warning.
Be constantly alert to the possibility of exposure to heat and other hazards.
2. SIZING, FIT AND ADJUSTMENT
Before each use of this helmet, make sure that it is sized, fits and adjusted properly
The interior helmet harness allows the optimum adjustment of the helmet fit to the
head.
Individual setting can be carried out by means of the new method of adjusting the
headband to the respective head size from the outside.
The covering of the headband can be removed for easy cleaning. The headband can
be removed from the helmet for cleaning purposes without the need for tools. The
complete interior harness of the helmet can be easily exchanged.
The visor provides LIMITED protection only to the facial area it covers.
To provide this limited protection you must lower the visors fully to the detent,
no intermediate position is allowed.
The visors must be stowed in the full upright position when a SCBA facepiece is worn.
The trapezoidal shaped chinstrap is made of flame-retardant, highly heat-resistant
material. In combination with the integrated padding, the chinstrap ensures pleasant
wearing. The chinstrap can be individually adjusted both laterally and vertically in the
neck area.
The ear covers can be easily removed for cleaning purposes.
You must assure that the ear covers of this helmet are down and interface with your
hood, SCBA and coat collar so that there is no gap in protection during use.
2.1 Donning your protective helmet
General adjustment
The helmet can be smoothly adjusted between minimum and maximum size using the
external ratchet knob.
1. The integrity, fit, and proper assembly of the helmet, suspension system, ear covers, and
chinstrap must be checked before each use.
2. Release the headband by turning the ratchet knob counter-clockwise.
3. Put the helmet on and hold it down on your head.
4. Tighten the headband by turning the ratchet knob clockwise to obtain a snug fit. Never
tighten the ratchet beyond its limits – this could result in damage of parts of the ratchet
and in reduced protection.
8