Publicidad
Idiomas disponibles
Idiomas disponibles
If you drop the trimmer, carefully inspect it for damage. If the blade
is bent or cracked, handles broken or if you see any other condition
that may affect the trimmer's operation, it must be repaired before
putting it back into use. Call our customer service help line at
1-800-618-7474 for assistance.
CAUTION: Do not at any time let brake fluids, gasoline, petroleum
based products, penetrating oils, etc., come in contact with plastic
parts. They contain chemicals that can damage, weaken or destroy
plastic.
Make sure the battery is detached from the unit, then use only mild
soap and a damp cloth to clean the tool. Never let any liquid get
inside the tool; never immerse any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment should be performed by a
qualified individual using only identical replacement parts.
Problem
Unit does not run
Slow running, noisy or hot blades
Battery will not charge
Call us first with questions about operating or maintaining your pole hedge
Standard Time, or get assistance on SCOTTS.AMERICANLAWNMOWER.COM.
MAINTENANCE
TROUBLESHOOTING
Possible Cause
Battery not making contact
Trigger switch not operational
Battery not installed properly
Battery not charged
Dry, corroded blades
Blades or blade support bent
Bent or damaged teeth
Loose blade bolts
Battery not inserted into charger
Charger not plugged in
Surrounding air temperature too
hot or too cold
CALL US FIRST !!
trimmer at 1.800.618.7474 between 8:00 a.m. – 5:00 p.m. Eastern
The cutting blades are made from high quality, hardened steel and
with normal usage, they will not require re-sharpening. However, if
you accidentally hit a wire fence, stones, glass or other hard objects,
you may put a nick in the blade. There is no need to remove this
nick as long as it doesn't interfere with the movement of the blade.
If it does interfere, make sure the battery is detached from the unit
and use a fine toothed file or sharpening stone to remove the nick.
Fertilizers and other garden chemicals contain agents which
greatly accelerate the corrosion of metals Do not store the tool
on or adjacent to fertilizers or chemicals.
LUBRICATE BLADES - Stop the unit
and remove the battery pack. Then
remove any debris on blades. Apply a
light machine oil along the edge of the
top and bottom blade supports. Make
sure handles remain clean and dry.
Check battery is fully inserted
Check that lock off button is fully depressed before moving
trigger
Check battery installation
Check battery charging requirements
Lubricate blades
Straighten blade or blade support
Straighten teeth
Tighten blade bolts
Insert battery into charger until red LED appears
Plug charger into a working outlet
Check current at receptacle by plugging in a lamp or other
appliance
Check to see if receptacle is connected to a light switch which
turns power off when you turn out the lights.
Move charger and tool to a surrounding air temperature of about
39° F (4° C) or below 104° F (+40° C)
8
LPHT12122S
Possible Solution
Publicidad
