Fuel Tank Filter - Pulsar PG4500iSR Manual Del Operador

Fuel Tank Filter

To clean, remove fuel cap and filter.
•
Clean filter in a bucket of hot water with dish detergent.
•
Dry the filter the filter with a clean rag.
•
Install filter.
•
Install fuel cap.
•
Storage and Transportation of the Generator:
When transporting the generator, turn fuel valve knob to the OFF position. Keep the generator on level ground to prevent fuel
spillage. Fuel vapor or spilled fuel may explode or ignite.
•
Remove any debris that has collected on the generator and around the muffler and control panel. Use a brush or vacuum to
remove loose dirt.
•
Inspect air cooling slots; remove any debris if obstructed.
•
For short-term storage, start the generator once every 7 days.
•
For intermediate term storage from 3-6 months, add fuel stabilizer to prevent stale fuel from causing acid and gum deposits in
the fuel system and carburetor.
•
For long-term storage, drain the fuel.
Store a sheltered location such as a garage or outdoor storage shed where temperatures do not fall below freezing.
•
The generator must be Shipped, Operated and Stored in the upright position.
•
MAINTENANCE
22