INSTALLATION
! The kitchen area should be dry and aired and equipped with efficient
ventilation.
When installing the oven, easy access to all control elements should
be ensured.
! This is a built- in oven, and its back wall and one side wall can be
placed next to a high piece of furniture or a wall. Coating or veneer
used on fitted furniture must be applied with a heat- resistant
adhesive (100ºC). This prevents surface deformation or detachment
of the coating.
! Make an opening with the dimensions given in the diagram for the
oven to be fitted.
! Make sure the mains plug is disconnected and then connect the
oven to the mains supply.
! Insert the oven completely into the opening without allowing the four
screws in the places shown in the diagram to fall out.
-49-