How To Change Bulb; Troubleshooting Guide; No-Trouble Things; Troubleshooting - Premium PRF200LW Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Note: Do not pour water to the refrigerator exterior walls, since this will
affect the insulation. Do not use hot water, acid, alkali, gasoline, benzene,
caustic cleanser, alcohol, or hard brushes to wipe the plastic parts.
3. How to change the bulb
Unplug the appliance. Remove the lamp cover at the back of the thermostat
box. Remove the old bulb and place the new one. Put back the lamp cover.
4. Stop to use
Avoid turning off the refrigerator. Let it work for long periods of time. Even
there is no food stored, keep it on in order to keep it working properly for a
long time.
If you must turn it off and not use it for a long period of time, turn it off, follow
the information above to clean it and keep it in a dry and clean place. Store
the refrigerator with the door slightly open, so the door gasket will not stick
to the cabinet.

Troubleshooting guide

1. No-trouble things

The issues below do not represent any trouble, so go ahead.
If there is a water flowing sound, this is the compressor sound.
If you hear a "pengpeng" sound, this is caused by the sudden change of
temperature that causes the materials to shake a little.
Compressor is hot.
When it is working, the highest temperature is 90℃
When the left and right side of the refrigerator are hot
When it is working, the two sides can reach an average 55℃
The exterior of refrigerator shows condensation.
It's caused by a high level of humidity, just dry it, please!

2. Troubleshooting

If the refrigerator does not work normally, you can check it by yourself
before calling for maintenance:
If the refrigerator stops working, check:
If the thermostat is on "0" button.
If the power plug is well connected into the socket.
If there is power or not, or the safety is off.
If it starts within 5 minutes after last power off.
If Compressor does not work, check:
The thermostat is put on too much cold.
The door can't be closed too well.
The surrounding temperature is too high or is under the sunshine.
There is too much food and this affects the cold air flow.
There is too hot food in the refrigerator.

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Prf201lbPrf202ls

Tabla de contenido