jbc CT-SA Manual Del Usuario página 5

Maintenance
Allow to cool before carrying out maintenance or storage. Always unplug the handle from the station
and remove it from the stand.
- Use a damp cloth to clean the tray and the protective screen.
Alcohol can only be used for cleaning the metal parts.
- Replace any defective or damaged parts. Use original JBC spare parts only.
- Repairs should only be performed by a JBC authorized technical service.
Safety
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
- Do not use the appliance for any purpose other than to hold the solder pot. It is not a tool stand.
- Do not use the equipment in environments with risk of fire or explosion.
- Allow to cool before handling.
- Before inserting the cartridge, turn off the station. If T470 is used, insert the cartridge and tighten
the screw.
- Use on a level and stable surface.
- The stand can reach extreme temperatures. Glasses and protective gloves are recommended.
- Do not melt "Cored Flux solder".
- Do not leave the appliance unattended when it is on. Turn off when not in use or not supervised.
- Do not use next to flamable materials. Do not spill liquid into the solder pot.
- Utmost care must be taken with liquid tin waste which can cause severe burns.
- Keep your workplace clean and tidy.
- Be careful with the fumes produced when soldering. The use of fume extractors is recommended.
- This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children must not play with the appliance. Cleaning and user maintenance
must not be carried out by children without supervision.
- Maintenance must not be carried out by children unless supervised.
Protective screen
w w w.jbctools.com
Tray
5 5 5