Phcbi MCO-50AIC Instrucciones De Operación página 29

HOME SCREEN
⑨
⑫
<Left side of the display>
⑨ Outer door status display area
Open: "Door:Open" is highlighted.
Closed: "Door:Closed" is displayed.
Locked: "Door:Lock" is displayed.
⑩ UV lamp status display area
This area is available when the optional UV lamp
is used.
When UV lamp is ON: "UV:ON" is highlighted.
When UV lamp is OFF: "UV:OFF" is displayed.
⑪ CO gas supply line indicator A and B
2
When the optional gas auto changer is used, the
CO gas supply line (CO
2
port) currently in use is highlighted.
It blinks when the CO
2
pages 67–69 for reference).
⑫ Message count display area
When the total number of messages is 1 or more,
the number is displayed.
The display shows the "message number
currently displayed in the screen/total number of
the messages".
When the left/right marks (◁▷) are displayed,
you can see the other messages using the left
and right keys.
*1 When an optional Electric lock MCO-170EL is installed.
:
⑩
⑬
* 1
gas pipe connection
2
cylinder is empty (see
⑪
⑭
<Right side of the display>
⑬ Error/Warning display area
Displays the current error/warning (See pages
78–81).
If there is an error: "Err
will be displayed.
If there is a warning: "Warning" will be displayed.
⑭ Message display area
Error/warning/other message is displayed (see
pages 78 –81).
Notes:
When the unit meets the following all conditions,
the display automatically starts scrolling from
right to left.
•Not in an alarm condition (no error messages
are displayed).
• The display areas for temperature and CO
density are not blinking.
• The outer door is closed.
• No keys have been pressed for 30 seconds or
more.
Scrolling can be stopped in either one of the
following conditions.
• In an alarm condition (error messages are
displayed).
• Temperature display area or CO
display area is blinking.
• The outer door is opened.
• Any key is pressed.
" ( is the error code)
XX XX
density
2
2
29