Electrical Connection - Trailfx ATV Manual Del Propietário

Electrical Connection:

Positive Terminal (+)
Handle Bar Mini Rocker Switch
Yellow Terminal
OUT IN
Small Red Cable
ATV Ignition Key
Small Red Cable
1. Please refer to Figure 6 while making electrical connections.
2. Connect one end of the "Yellow" cable to the positive (+) Terminal of the winch motor.
3. Connect the other end of the "Yellow" cable to the "Yellow Terminal marked as M+" on the solenoid.
4. Connect one end of the "Blue" cable to the negative (-) Terminal of the winch motor.
5. Connect the other end of the "Blue" cable to the "Blue Terminal marked as M-" on the solenoid.
6. Connect one end of the "Red" cable to the "Red terminal marked as B+" on the solenoid.
7. Connect one end of the "Black" cable to the "Black terminal marked as B-" on the solenoid.
8. There are 2 white plastic connectors provided from the solenoid.
9. Connect any one of the white plastic connectors with the black jacketed cable which is connected
to the handlebar mini rocker switch on the other end.
10. Connect the other white plastic connector with the black jacketed cable which is connected to the
remote receiver socket on the other end.
11. Make sure that the 2 small red cables coming from the handlebar mini rocker switch & handheld
remote control are connected to the ATV Ignition switch as stated under the handlebar mini
rocker switch mounting Instructions & remote control mounting instructions on the previous page.
12. Connect the loose end of the "Red" cable from the red terminal of solenoid to the positive (+) terminal
of the battery.
13. Connect the loose end of the "Black" cable from the black terminal of the solenoid to the negative (-)
terminal of the battery.
14. Make sure that all the cable connections are properly connected with the referred terminals and are
secured, clear of sharp edges & metal objects.
15. Use the provided black color cable / terminal protectors to protect connection points.
16. Use extra electrical insulation tape & cable tie wraps to secure wiring.
10
Motor
Yellow
Blue
Negative Terminal (-)
M+ M-
Blue Terminal
B- B+
Red Terminal
Solenoid
White Plastic Connector
Figure: 6
Negative Terminal (-)
Black
Red
Remote
Receiver Socket
Green &
Black
Remote Control
Remote
Transmitter
(OPTIONAL)
Positive Terminal (+)
Handheld
Remote Control
Wireless