Storage And Cleaning; Environmental Policy; Customer Service - Vito Agro VIMP2810 Manual De Instrucciones

A loose spark plug can overheat and damage the
engine.
Always use the type of spark plug recommended
by the manufacturer (VIVELA5510). An improper
use of a spark plug can damage the cylinder.

Storage and cleaning

Storage
Preparing storage for long periods is vital to avoid
problems and increase the useful life of the pruning
chain saw.
Never store the equipment with petrol in the tank.
Depending on the region and storage conditions, petrol
can deteriorate and oxidize, causing damages in the
carburetor and fuel system, difficult starts and clogging
caused by particle deposition.
Before storage proceed as follows:
1. Remove the fuel from the tank;
2. Start the engine until it stops due to lack of fuel;
3. Remove the spark plug and add 2-stroke engine oil
(5-10 cl) to the cylinder through the spark plug hole;
4. Place a clean cloth over the spark plug hole and pull
the starter handle to dispense the oil to the cylinder;
5. Pull the recoil starter slowly while feeling some
resistance. The piston rises and the intake and
exhaust valves are closed. Leaving the engine in this
position will help protect against internal corrosion;
6. Reinstall the spark plug;
Cleaning
The pruning chain saw must be thoroughly cleaned after
each use. Remove any waste accumulated in the saw
chain. Careful handling protects the equipment and
extends its service life.

ENVIRONMENTAL POLICY

The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of combustion equipment in your
household waste!
Waste such as used oil, fuel, lubricant, filters and
wearing parts can harm humans, animals and the
environment and as such must be properly disposed of.
Make sure that the deactivated equipment is forwarded
for disposal in a technically correct way.
You can obtain information regarding the disposal of
the pruning chain saw through the person in charge for
the recycling in your city.

CUSTOMER SERVICE

Tel.: +351 256 248 826
E-mail: international@centrallobao.pt
Site: www.centrallobao.pt
43