Kohler K-13108 Guia De Instalacion página 5

Install the Anchors
Nail
4. Anchor Installation
NOTE: You may need to disassemble some of the accessories. Some
accessories will be packed with the wall plate installed in the post.
Loosen the setscrew and remove the wall plate if needed.
Press and hold the legs of a wall anchor together, then insert the
wall anchor legs into the hole. Insert all wall anchors into the
pre-drilled mounting holes.
Carefully tap each wall anchor into the finished surface. Ensure
the wall anchors are flush with the finished surface.
If the wall anchor was inserted into a space between the studs, it
will be necessary to spread the wall anchor legs.
NOTE: If the wall anchor was inserted into a space between the
studs, it will be necessary to spread the wall anchor legs. Insert a
thin, long object (such as a finishing nail) into the wall anchor hole
to spread the anchor legs.
Repeat for all wall anchors inserted between studs.
5. Wall Plate Installation
For accessories with setscrews located on the bottom, orient the
wall plate with the large slotted mounting hole up and the
smaller hole down.
Kohler Co.
Install the Wall Plate
Large
Anchor Mounting Hole
Wall
Plate
Mounting
Hole
5
Panhead
Screws
1042441-2-C