Setting The System Password; Installation Tips - Lorex L23WD800 Serie Manual Del Usuario

Basic System Setup

SETTING THE SYSTEM PASSWORD

By default, the system password is disabled. For security reasons, when accessing PTZ, Search,
Archive, and system power menus, a password will always be required even if the system
password is disabled.
To enable your system password, see "User Management" on page 66.

INSTALLATION TIPS

The L23WD Series stand comes with a built in cable channel to easily organize and conceal wiring.
The stand can be removed to mount the monitor directly to a wall using VESA standard mounting
brackets.
Connect the power cable, cameras, ethernet cable and any alarm devices to the system by
running the cables through the hole in the stand.
Figure 2.4 Installation tips.
10
Remove the four screws to replace stand with
VESA mount brackets
Route cables through cable channel