Yamaha NX-B55 Manual De Instrucciones página 14

connection for playing music
Switching to another
Only one other device can be connected to this unit at the same time. If
you want to switch the currently connected device to another one,
perform the following steps.
a Perform either of the steps below,
Off
Press p (power) to turn off this unit once. Then,
press p (power) to turn on this unit within 5 seconds.
Operate the other device which the Bluetooth connection has been
established with, to disconnect the Bluetooth connection.
b Operate the other device to which you want to switch Bluetooth connection.
If the other device is being paired with this unit for the first time, complete
pairing within about 5 minutes.
If more than about 5 minutes has passed since this unit is turned on again,
this unit may have automatically reconnected to its last-connected device,
through Auto Connection. In that case, start over from step a.
7
En
device
or .
On (within
5 seconds)
off
Clearing all the pairing data
a Press p (power) to turn off this unit.
b Set the AUTO STANDBY switch on the rear to INIT..
c Press p (power) to turn on this unit, and wait about 3 seconds.
All the pairing data in this unit will be deleted.
d Press p (power) to turn off this unit.
e Set the AUTO STANDBY switch on the rear back to the previous position (ON in
default setting).