Install/Remove The Swing Away Or Elevating Legrest - ARDEA ONE CP100 Serie Manual De Instrucciones

CP300-xx / CP310-xx / CP200-xx / CP205-xx
CP620-xx / CP625-xx
• Place the armrest rear side into the rear, then hook them into the front by
overturning them (Fig.3, FIG.3A)
• Insert the tubes in their supports triggering properly locking clip
• To remove, unlock the armrest by pushing the front release lever, then overturn them and
extract by pulling the rear release lever
• For removal press the release button

8.4 Install/remove the swing away or elevating legrest

(FIG.3A)
(FIG.3B)
A - Push button
B - Pin for stop
(Fig.4, Fig.4A)
(A) and then lift to up
• Assembly the swing away or elevating legrest
by installing the hinge plates on the footrest
onto the hinge pins on the wheelchair frame.
Push the legrest toward inside of the wheelchair
until it locks into place
• Remove the legrest by pushing the legrest release
lever in ward, rotate outward, lift the legrest off the
hinge pins
(FIG.5)
(FIG.4A)
(FIG. 3B)
(FIG. 3B)
(fig.5)
7