Component List; Technical Data; Noise Information; Vibration Information - Worx WX380 Manual Original

Chiseling
Bit rotation

COMPONENT LIST

1. DUST PROTECTION CAP
2. CHUCK LOCKING SLEEVE
3. FUNCTION SELECTOR DIAL
FORWARD AND REVERSE ROTATION
4.
CONTROL
ON/OFF SWITCH WITH VARIABLE
5.
SPEED CONTROL
6. DEPTH GAUGE
7. BATTERY PACK RELEASE BUTTON*
8. BATTERY PACK*
9. AUXILIARY HANDLE
10
*Not all the accessories illustrated or
described are included in standard delivery.

TECHNICAL DATA

Type WX380 WX380.X (3- designation of
machinery, representative of Hammer)
Voltage
No load speed
Impact rate
Impact energy
Steel
Max.
drilling
Wood
capacity
Concrete
Machine
weight(Bare tool)
**Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
20V Cordless Brushless Rotary
Hammer
WX380
WX380.X***
20 V Max**
0-1210 /min
0-5400bpm
2.2 J
13 mm
27 mm
24 mm
2.6kg
*** X=1-999, A-Z, M1-M9 there are only used for
different customers, there are no safe relevant
changes between these models
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K &K
pA wA
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax cover sum) determined
according to EN60745:
Vibration emission value
Hammer drilling
a
h,HD
into concrete
Uncertainty K = 1.5 m/s
Vibration emission value
a
Chiseling
h,CHeq
Uncertainty K = 1.5 m/s
The declared vibration total value may be used for
comparing one tool with another, and may also be
used in a preliminary assessment of exposure.
WARNING: The vibration and noise
emissions during actual use of the power tool
can differ from the declared value depending on the
ways in which the tool is used especially what kind
of workpiece is processed dependant on the
following examples and other variations on how the
tool is used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained
Using the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
Model Capacity
WA3553 4.0Ah
WA3760 0.4A
WA3869 2.0A
WA3880 2.0A
L = 87 . 4 dB(A)
pA
L = 98.4 dB(A)
wA
3.0 dB(A)
= 22.616 m/s
2
2
= 18.932 m/s
2
2
EN