Wiring Diagrams - Cooper Lighting HALO Commercial HC8R Instrucciones De Instalación

5. Connect white to white, black to black, and green
(from electrical service) on the supply side to the bare
copper wire in the junction box. Place all excess wiring
and connections into the junction box and replace the
cover. Place all connections and excess wiring into the
junction box and replace cover.
Driver
Figure 43.
Driver Replacement
To avoid possible electrical shock, be sure that the power is
turned off before installing or servicing this fixture.
The driver should be replaced by a qualified electrician.
● ●
The driver may be replaced either from below or above
● ●
the ceiling.
1. Remove trim assembly from the housing (Figure 40).
2. Remove the driver and junction box cover assembly.
(Figure 43).
3. Disconnect the wiring to the driver by undoing the
connectors then cut the red and blue wires.
4. Discard the old driver and junction box cover assembly.
5. Connect the new driver leads with the connectors.
6. Reattach the new driver and junction box cover
assembly.

Wiring Diagrams

For D010/D010347
Black (Line) Black (Line)
0-10V
White White
Dimming
(Neutral) (Neutral)
Driver
Ground
Installation Instructions – HC8R/HC812R Recessed LED Retrofit
Red
Red
Blue
LED
Purple
Black
Gray
Moudle Wiring
Diagram
0-10V
Dimming
Option (Field
Installation)
COOPER LIGHTING SOLUTIONS
Dimming
The Halo Commercial HC8R/HC812R LED luminaire can be
dimmed however updates in dimmer technology and special
conditions may apply depending on the dimmer type being
used. For the latest information regarding dimmers for use
with this LED luminaire, please see the Halo Commercial
HC8R/HC812R LED Dimming Reference Sheet at
www.cooperlighting.com. In addition, you may wish to
consult the dimmer manufacturer for their latest dimmer
configurations and product information.
5-YEAR LIMITED WARRANTY
THE FOLLOWING WARRANTY IS EXCLUSIVE AND IN LIEU OF
ALL OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED OR
STATUTORY INCLUDING, BUT NOT LIMITED TO, ANY WARRANTY OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
Cooper Lighting Solutions ("CLS") warrants to customers that, for a
period of five years from the date of purchase, CLS products will be
free from defects in materials and workmanship. The obligation of CLS
under this warranty is expressly limited to the provision of replacement
products. This warranty is extended only to the original purchaser of the
product. A purchaser's receipt or other proof of date of original purchase
acceptable to CLS. This is required before warranty performance shall
be rendered.
This warranty does not apply to CLS products that have been altered or
repaired or that have been subjected to neglect, abuse, misuse or
accident (including shipping damages). This warranty does not apply
to products not manufactured by CLS which have been supplied,
installed, and/or used in conjunction with CLS products. Damage to the
product caused by replacement bulbs or corrosion or discoloration of
brass components are not covered by this warranty.
LIMITATION OF LIABILITY:
IN NO EVENT SHALL CLS BE LIABLE FOR SPECIAL, INDIRECT,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (REGARDLESS OF
THE FORM OF ACTION, WHETHER IN CONTRACT, STRICT LIABILITY,
OR IN TORT INCLUDING NEGLIGENCE), NOR FOR LOST PROFITS;
NOR SHALL THE LIABILITY OF CLS FOR ANY CLAIMS OR DAMAGE
ARISING OUT OF OR CONNECTED WITH THESE TERMS OR THE
MANUFACTURE, SALE, DELIVERY, USE, MAINTENANCE, REPAIR OR
MODIFICATION OF CLS PRODUCTS, OR SUPPLY OF ANY
REPLACEMENT PARTS THEREFORE, EXCEED THE PURCHASE PRICE
OF CLS PRODUCTS GIVING RISE TO A CLAIM. NO LABOR CHARGES
WILL BE ACCEPTED TO REMOVE OR INSTALL FIXTURES.
All returned products must be accompanied by a Return Goods
Authorization Number issued by the Company and must be returned
freight prepaid. Any product received without a Return Goods
Authorization Number from the Company will be refused. CLS is
not responsible for merchandise damaged in transit. Repaired or
replaced products shall be subject to the terms of this warranty and are
inspected when packed. Evident or concealed damage that is made in
transit should be reported at once to the carrier making the delivery and
a claim filed with them.
Reproductions of this document without prior written approval of CLS
are strictly prohibited.
IB517033ML
Installation instructions
7