Rear-Facing Installation Instructions; Group 0 + (0-13Kg) Children Isofix+ Top Tether + Harness; Group 1 (9-18Kg) Children Isofix+ Top Tether + Harness - Be Cool Saturn Manual Del Usuario

3. REAR-FACING INSTALLATION INS-
TRUCTIONS
Group 0 + (0-13kg) children
ISOFIX+ top tether + harness
Group 1 (9-18kg) children
ISOFIX+Top Tether + Harness
If your vehicle is equipped with Isofix anchor points,
these should be used to obtain a more stable
installation.
These cars will have plastic elements that guide the
seat's Isofix anchors into their correct positions. If
your vehicle does not have these guide elements, you
can use the plastic guides provided with the car seat.
1a. Press the button (13) to turn the seat to the
rear-facing position.
1b. Slide the lsofix anchors B (6) to their maximum
length by turning the level A (18). Do this on both
sides of the seat.
Connect the lsofix anchors until you hear them click
into place. The display window on the button (17) will
turn from red to green. Push the seat as far back as
possible. Make sure that both lsofix are in the same
position once you have pushed the seat back.
1c. Press and pull the button of regulator up, release
top tether to an appropriate length.
Put top tether in one of guide grooves (14) on shoul-
der. Connect the Top Tether in the
Anchor point intended for this in the vehicle
marked with the symbol:
Lastly, tighten the strap of the TT system until the
green signal is displayed on the indicator.
The strap should go over the backrest of the vehicle
EN
31