Descargar Imprimir esta página

Warranty Information - BriskHeat SLCBLUC Manual De Instrucciones De Instalación

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

17.
For heating cable with no outer Jacket, slide parts
into position as shown.
18.
Fasten the metal pipe mounting bracket loosely to
the pipe with the metal band. Position the bracket
such that the cable and fitting come straight up
through the hole, and then tighten the band.
19.
Metallic junction box must be used to ensure
proper ground. Insert heating cable and tighten.
Note 1: Follow instructions provided with the
junction box to seal against water if used in wet
locations.
Note 2:The free length of the leads inside the
junction box shall be at least 6" (2.5cm).
®
© BriskHeat
Corporation. All rights reserved.
SLCBLUC Power Connection Kit
20.
Make connections as shown, connect the power
conductors to the cable leads. Connect the
incoming supply ground to the cable braid and to
the green ground wire. The wire nuts included are
not intended for use with aluminum feed wires.
The junction box must be grounded.
For heating cables with
For heating cables with
no outer jacket
outer jacket
21.
For roof and gutter applications, apply "Electric
De-icing" label to junction box, as shown.
7

WARRANTY INFORMATION

BriskHeat warrants to the original purchaser of this product for the period of eighteen (18) months from date of shipment
or twelve (12) months from date of installation, whichever comes first. BriskHeat's obligation and the exclusive remedy
under this warranty shall be limited to the repair or replacement, at BriskHeat's option, of any parts of the product which
may prove defective under prescribed use and service following BriskHeat's examination, is determined by BriskHeat to
be defective. The complete details of the warranty can be found online at www.briskheat.com or by contacting us at
1-800-848-7673 (toll free, U.S. / Canada) or 1-614-294-3376 (Worldwide).
4800 Hilton Corporate Dr., Columbus, OH 43232
Toll Free: 800-848-7673
Phone: 614-294-3376
Fax: 614-294-3807
Email: bhtsales1@briskheat.com
®
© BriskHeat
Corporation. All rights reserved.
SLCBLUC Power Connection Kit
8

Publicidad

loading