SHUT-DOWN
During extended periods of non-use or MAINTENANCE work, the rotary handle of the shut-off
fitting must be rotated to the position perpendicular to the flow direction - the shut-off fitting is
closed.
When using the product the next time, observe the steps LEAK TESTING and START-UP!
DISPOSAL
In order to protect the environment, products contaminated with water-
hazardous substances or that have come in contact with such substances
must not be disposed of in the domestic waste, to public waters or channels.
The product must be disposed of via local collection stations or a recycling station.
TECHNICAL DATA
Maximum admissible pressure
Housing material
Pressure resistance housing
Nominal flow rate V
Pressure loss Siku 70μm
Pressure loss Siku 35μm
Pressure loss Siku 70μm long
MC 7, 5 - 20μm
Ventilation output
Flow rate V
n,R
return line – supply line
at maximum pressure difference
Ambient temperature
WARRANTY
We guarantee that the product will function as intended and will not leak during
the legally specified period. The scope of our warranty is based on Section 8 of
our terms and conditions of delivery and payment.
TECHNICAL CHANGES
All the information contained in this assembly and operating manual is the result of product
testing and corresponds to the level of knowledge at the time of testing and the relevant
legislation and standards at the time of issue. We reserve the right to make technical changes
without prior notice. Errors and omissions excepted. All figures are for illustration purposes
only and may differ from actual designs.
Part no. 13 512 53 b
Combined heating oil filter breather type GS Pro-Fi 3
PS 6bar with plastic tray
PS 10bar with replacement filter insert with metal vent
cup
PS 16bar with metal tray
Zinc die cast ZP0410
PS 16bar
110L/h
n
110mbar
210mbar
105mbar
120mbar
10L/h
Δ
p
o,d,max
-10°C to +60°C
= 1.3bar
11 / 12