Kohler K-3422 Guia De Instalacion página 6

Tank Bolt
Washer
Gasket
Brass Nut
3. Install the Tank
CAUTION: Risk of product damage. Overtightening may cause
breakage or chipping of the vitreous china.
Remove the nuts and washers from the preassembled tank bolts
on the bottom of the tank.
Set the nuts and washers aside.
Position the tank on the bowl by centering the gasket on the bowl
inlet.
Assemble the washers and nuts to the tank bolts.
Tighten the nuts so the tank is level. Be sure the nuts are tight
enough to achieve a watertight seal.
1004604-2-F
Tank Bolt
Tank
Gasket
Viewing The
Assembly From
Under The Tank
6
Tank
Kohler Co.