Controls And Features (Fig. 1)
• Save these instructions
5.
Starter Grip: Pull the starter grip to start engine. Refer to Engine Owner's Manual
for further information.
Tow Bar (if equipped): Used to tow the chipper shredder behind a lawn tractor or
6.
ATV. Tow speed must not exceed 6 mph. Not approved for highway usage.
Throttle Control: Regulates the engine speed. Throttle control must be placed in
7.
the fast
position for the engine to operate properly. Refer to Engine Owner's
Manual for further information.
8.
Chipper Chute: Branches up to 2.5" (63.5 mm) in diameter may be fed into the
chipper chute for chipping.
Wing Knobs: Holds chute deflector in place during operation and can be loosened
9.
to allow access to impeller housing.
10. Chute Deflector: Debris is discharged from chute.
11. Debris Bag: Collects debris discharged through chute deflector.
Questions? Call Toll Free at 1-800-737-2112
ENG - 11
Copyright © 2015 MAT Engine Technologies, LLC