Blade Care; Chipper Blades (Fig. 7-13) - Southland SCS2052.1 Manual Del Operador

Blade Care

• Save these instructions
WARNING
spark plug wire from the spark plug and place it where it cannot come in contact with
plug to prevent accidental starting and serious injury.
CHIPPER BLADES (FIG. 7–13)
WARNING
protect your hands.
1. Stop engine, disconnect spark plug and wait for chipper shredder to come to a
complete stop.
Remove debris bag. Refer to Emptying Debris Bag paragraph under Operation for
2.
correct procedure.
3. Remove bolt (25) securing brace to chipper chute (8).
4. Remove the three nuts and washers (26) secure in the chipper chute (8) to the housing.
5. Pivot the shredder grate upward as instructed in Cleaning the Impeller Housing
under Maintenance.
25
Questions? Call Toll Free at 1-800-737-2112
Before performing any maintenance, turn engine off and remove the
The impeller's chipper blades are sharp. Wear leather work gloves to
26
26
Figure 7
27
6. Rotate the impeller by hand until one of the
two chipper blades is visible through the
impeller housing opening.
7. Remove the hex screws (27) and nuts (28)
securing the blade. Retain the hardware.
ENG - 22
28
Figure 8
Copyright © 2015 MAT Engine Technologies, LLC