ASROCK Z590M Pro4 Manual Del Usuario página 25

Serial ATA3 Connectors
Vertical:
(SATA3_0:
see p.1, No. 12)
(SATA3_1:
see p.1, No. 13)
Right Angle:
(SATA3_2:
see p.1, No. 15)(Upper)
(SATA3_3:
see p.1, No. 16)(Lower)
USB 2.0 Headers
(9-pin USB3_4)
(see p.1, No. 20)
(9-pin USB5_6)
(see p.1, No. 19)
USB 3.2 Gen1 Headers
(19-pin USB3_3_4)
(see p.1, No. 24)
(19-pin USB3_5_6)
(see p.1, No. 14)
USB_PWR
P-
P+
GND
DUMMY
1
GND
P+
P-
USB_PWR
IntA_P_D+
IntA_P_D-
GND
IntA_P_SSTX+
IntA_P_SSTX-
GND
IntA_P_SSRX+
IntA_P_SSRX-
Vbus
1
Vbus
IntA_P_SSRX-
IntA_P_SSRX+
GND
IntA_P_SSTX-
IntA_P_SSTX+
GND
IntA_P_D-
IntA_P_D+
ID
Vbus Vbus
Vbus IntA_PB_SSRX-
IntA_PA_SSRX- IntA_PB_SSRX+
IntA_PA_SSRX+ GND
GND IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+ GND
GND IntA_PB_D-
IntA_PA_D- IntA_PB_D+
IntA_PA_D+ Dummy
1
These four SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
* If M2_1 is occupied by
a SATA-type M.2 device,
SATA3_3 will be disabled.
There are two USB
2.0 headers on this
motherboard. Each USB
2.0 header can support
two ports.
There are two USB 3.2
Gen1 headers on this
motherboard. Each USB
3.2 Gen1 header can
support two ports.
Z590M Pro4
21