Roger Technology H70/104AC Instrucciones Y Advertencias Para El Instalador página 31

28 01
Advance activation electric lock time with respect to the manoeuvre
00 02
SECONDS
-
The parameter is only visible if the electric lock is enabled (
29 03
Electric lock duration (activation that follows the advance, parameter
00
DISABLED
01 06
SECONDS
-
If the pressure surge is enabled (para.
The parameter is only visible if the electric lock is enabled (
30 00
"generator" mode
00
OFF
01
ON (Digital filtering for additional power from generator)
NOTE: parameter
Enabling this feature improves the control of the movement with power from generators.
31 05
Torque level during normal stroke
01 08
1 minimum force ... 08 maximum force
-
NOTE: parameter
This parameter is always minor or equal to te parameter
32 06
Torque level during slowed down stroke
01 08
1 minimum force ... 08 maximum force
-
NOTE: parameter
33 08
Torque level during start-up
01 08
1 minimum force ... 08 maximum force
-
34 03
Soft-start ramp setting
00
OFF (soft-start disabled)
01 02
soft-start
-
03 04
even softer start (only available if encoder is enabled)
-
01
A low value (
speed more slowly, thus allowing a more gentle and gradual start of the leaf.
If the encoder is disabled (
35 08
Level of force during the reversing start-up from rib or encoder intervention
00
start-up disabled: (performs with the force set by parameter
01 08
1 minimum force ... 08 maximum force
-
4-
in simplified mode.
9-
in simplified mode.
A-
in simplified mode.
) involves rapid acceleration, while a high value (
75 00
38 29
) para. must have a value greater than para.
79 99
33
) the standard production value is
79 99
).
).
.
04
) means reaching the operating
02
.
31
)
28
)
38
.
31