Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Specifications
Technology
Biometry and Proximity (125 Khz, EM)
Use
Outdoors
Finger, Card, Finger or_and Card
Authentication
Fingerprints per user
1-10 fingerprints
Proximity reading type
EM 4002_4100
Reading distance
2 to 5cm
Wiegand 8 to 128 bits; Default: Wiegand 26bit
Interface
Protocol programming
By software
Cable distance
50m
Fingerprint Sensor Type
Swipe Capacitive
1:1000 identification time 970 msec, including feature extraction time
Fingerprint enrolment
On the reader or from the USB desktop reader
Cable, 1m
Panel Connection
Externally Controlled
Green and Red LED
Orange LED
Idle mode
Buzzer ON_OFF
Yes
Mounting
1.
5mm
Recommended swipe technique
Follow the below instructions for correct finger swiping. Starting from the first finger joint, place the selected
finger on the swipe sensor and move it evenly towards oneself in one steady movement.
Result:
For a valid swipe: Tricolour Status LED turns green + OK Beep(short + long beep)
For an invalid or misread swipe: Tricolour Status LED turns red + Error Beep ( 3 short beeps)
x 6
The fingerprints are enrolled in the system by swiping the finger a minimum of 6 times.
Indication
2.
4 (4 x 30mm)
Green
- Access granted
Red
- Access denied
Orange
- Idle mode
Backlight ON_OFF
Tamper
Consumption
IP Rating
Power supply
Operating Temperature
Dimensions (mm)
Housing
Storage/Operating Humidity 5% to 93% RH without condensation
3.
OK beep
- short + long beep
ERROR beep
- 3 short beeps
Swipe finger - 2 short beeps
Yes, by software settings
Yes
Max. 150mA
IP65
9-14 Vdc
-20°C to +50°C, non-condensing
100 x 94 x 30
Moulded Aluminium
100 mm
94 mm
30 mm
4.
EN
Publicidad
Tabla de contenido
