Program Setting - Aqua Medic Ocean Light LED Contro Manual Del Usuario

Programmable light control for Aqua Medic Ocean Light LED and ECOplant LED
1. Technical Data
- safety tension 24 V
- dimensions: 11 x 5 x 1.9 cm
2. Unpacking
On unpacking, please check the light control immediately for any damages. In case of any complaints,
please contact your dealer directly.
3. Included in shipment
Ocean Light LED Control
•
A Y-cable for connecting several Ocean Light LED's to one control unit is available as accessory.
Pict. 1: Y-cable for Ocean Light LED
4. Installation

4.1. Program setting

The Ocean Light LED Control may only be used on the designated socket (pict. 2, No. 1) of an Ocean
Light LED or ECOplant LED.
Pict. 2: 1 = socket for Ocean Light LED Control
Buttons:
M: menu
OK: confirm
up
＋
down
－
1. The display appears as soon as the controller is plugged into an Ocean Light LED or the OK button
is pressed. After pressing the OK button, also the display's lighting is turned on. After five seconds
without further keystroke the lighting turns off again.
6