Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Instructions – Sanibel 301
IMPORTANT SAFETY INFORMATION - READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION
Product must be installed in accordance with all National Electrical Code, Canadian Electrical Code, and all Local
●
●
and Provincial Codes.
Follow product label information and instructions before installing fixture. Retain installation instructions for future
●
●
reference.
Wiring and installation to be performed by a qualified electrician only. Turn OFF power before initial installation,
●
●
servicing and maintenance.
To reduce the risk of FIRE OR INJURY TO PERSONS: Lighted lamp is HOT! Turn OFF fixture and allow to cool
●
●
before replacing lamp. Do not touch hot lens, guard, or enclosure. Keep away from combustible materials. Do not
touch the lamp at any time. Use a clean, dry, soft cloth to handle the lamp. Oil from skin may damage the lamp.
Replace lamp only with correct wattage and type of lamp marked on label. DO NOT exceed the maximum wattage
●
●
listed on the fixture label.
Keep fixture lens area clear and free from debris as this may cause an unsafe condition.
●
●
The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition and void
●
●
product warranty.
All gaskets, O-rings and sealing surfaces must be kept clean during installation and service; failure to do this may
●
●
cause an unsafe condition and void product warranty.
Use UL listed waterproof wire connectors when making electrical connections (recommended).
●
●
Replace removable parts after servicing.
●
●
IMPORTANT LISTINGS AND CERTIFICATIONS SPECIFIC TO FIXTURE
SUITABLE FOR WET LOCATIONS.
●
●
SUITABLE FOR MOUNTING WITHIN 1.2M (4FT) OF GROUND.
●
●
CAUTION - RISK OF FIRE, MINIMUM 90°C SUPPLY CONDUCTORS.
●
●
ATTENTION: FIXTURE CONTAINS MAGNETIC TRANSFORMER. 120V OR 277V WITH 60 Hz INPUT, 12V, 50VA
●
●
OUTPUT.
ATTENTION: FOR USE WITH MAGNETIC DIMMING SWITCHES ONLY.
●
●
RECOMMEND LUTRON ARIADNI AVLV-600P AND DIVA DVLV-600P
●
●
HARDWARE REQUIRED FOR INSTALLATION (PROVIDED BY OTHERS)
9/64" Allen Wrench
●
●
1/2-14 NPS Conduit nut
●
●
Wire connectors (recommend silicone filled outdoor rated wire connectors)
●
●
2
WARNING
INSTRUCTIONS.
Installation Instructions – Sanibel 301
ADL141324
www.cooperlighting.com
Publicidad
