weasy WH35 Manual De Utilización página 8

. Take the dust compartment off the appliance by pushing on the button to unlock it.
. Take the lid off by twisting it anticlockwise (PICTURE 7), take the filters off (PICTURE
8) as well as the filter mesh (PICTURE 9).
Air entry filter (PICTURE 10)
Clean the air filter before putting the hoover back together.
You can get the air filter inside the mesh. Take the mesh off and press the locket down to expose the
filter.
To simplify cleaning, tap the filter and the mesh above a trash bin. You can rinse them clean under
warm water if necessary. (PICTURE 11).
Important: a brush would be too hard on the filters, only clean then under running warm water.
NOTE: After cleaning, the filter mesh should be completely dried lbefore being put backing place to
avoid damaging the appliance. We suggest letting it air dry for at least 24 hours after
cleaning.
Put the filters and the filter mesh back into their due places
Put the mesh back into place by aligning the triangular mark on the top of the mesh with the one on
the dust compartment. (PICTURE 12).