Belkin TuneCommand Manual Del Usuario página 7

Operating Instructions
LED Chart
Every time you push a button on the
Green
Remote, the green lights on the Remote
and the Receiver blink, indicating that the
signal has been received correctly.
If the Remote and the Receiver are too
far apart to communicate, the light on
Green
the Remote blinks amber (after a short
delay) instead of green when you press
a button. The light on the Receiver will
Amber
not blink.
The Remote's battery level is Red
automatically checked after every button
press. If the battery level is low, the
Remote's red light will blink, following
the green or amber blink. The low
battery should be replaced soon. The
TuneCommand will continue to function
normally until the battery is exhausted.
Storage Option
The TuneCommand Remote features a convenient
Mounting Port for storing the TuneCommand
Receiver when not in use—ensuring you can
always easily find it again.
Operating Instructions | 6
P74852ea_F8Z024ea.indb Sec1:6-Sec1:7 P74852ea_F8Z024ea.indb Sec1:6-Sec1:7
Received the signal
The receiver receives the signal
Out of range
The battery life is running out
Operating Instructions
Using the Multi-Clip
Do not slide on
SNAP
Snap the clip on the Transmitter
Adhesive backing
attaches to
smooth surface
How to snap on the clip when
using the lanyard (the clip is to be
used upside down in this case)
How to use with the surface-
mount hook
How to clip on the belt
EN
How to use the lanyard
and lanyard adjuster
Operating Instructions | 7
10/8/05 9:30:00 am 10/8/05 9:30:00 am