Factory Setting; End User Parameters - Sime D Serie Manual Del Usuario

10 USER PARAMETERS
Line Function
Setting the clock
1 Time of day
2 Weekday (actual)
3 Date (day, month)
4 Year
Switching time for heating program
5 Pre-selection of weekday
1–7 Day block
6 Switch-on time period 1
7 Switch-off time period 1
8 Switch-on time period 2
9 Switch-off time period 2
10 Switch-on time period 3
11 Switch-off time period 3
D.H.W.
12 Operating mode of D.H.W. heating
0 Off
1 ON
13 Nominal setpoint of D.H.W. temperature (TBWw)
TBWR – Line 80
TBWmax – Line 34 (OEM)
Heating circuit
14 Reduced setpoint of room temperature (TRRw)
TRF – Frost protection setpoint of room temp. (Line 15)
TRN – Setpoint knob heating circuit
15 Frost protection setpoint of room temperature (TRFw)
TRRW – Line 14
16 Summer/Winter changeover temperature
17 Slope of heating curve (S1)
2.5...40 Active
18 Actual value of room temperature (TRx)
19 Actual value of outside temperature (TAx)
To reset the attenuated outside temperature to TAx,
press the +/– buttons simultaneously for 3 seconds
Standard values
23 Standard times (Lines 6... 1 1)
To activate press the +/– buttons simultaneously
for 3 seconds
Service
50 Indication of faults
1) This setting line is active only if the controller is used in connection with a BMU.
1...7 Individual days
1)
1) TBWR...TBWmax
Range Unit
0...23:59 h / min
1...7 day
01.01...31. 1 2 tt.MM
...2099 aaaa
1–7 / 1...7 day
– –:– –...24:00 h/min
– –:– –...24:00 h/min
– –:– –...24:00 h/min
– –:– –...24:00 h/min
– –:– –...24:00 h/min
– –:– –...24:00 h/min
0 / 1 –
°C
TRF...TRN °C
4...TRRW °C
8...30 °C
2.5...40 –
0...50 °C
–50...+50 °C
– –
0...255 –
Risolution

Factory setting

1 min 00:00
1 day 1
1 –
1 –
1 day –
10 min 06:00
10 min 22:00
10 min ––:––
10 min ––:––
10 min ––:––
10 min ––:––
1 1
1 55
0.5 16
0.5 10
0.5 17
0.5 15
0.5 –
0.5 –
– –
1 –
85