Replace The Scraper; General Maintenance; Replace The Impeller - GreenWorks SSF405 Manual Del Operador

EN
9 MAINTENANCE
Remove the battery pack from the machine before
maintenance.
Wear correct clothing, gloves and safety glasses before
maintenance.
Use only approved replacement parts.
Do not let brake fluids, gasoline, petroleum-based materials
touch the plastic parts. Chemicals can cause damage to the
plastic, and make the plastic unserviceable.
Do not use strong solvents or detergents on the plastic
housing or components.
9.1

GENERAL MAINTENANCE

• Before each use, examine the machine for damaged,
missing, or loose parts such as screws, nuts, bolts and
caps.
• Tighten correctly all the fasteners and caps.
• Clean the remaining snow on the machine with a brush.
WARNING
WARNING
CAUTION
CAUTION
CAUTION
English
9.2

REPLACE THE SCRAPER

1. Put the machine on a flat, level surface.
2. Face up the impeller (4).
3. Remove the 4 screws below the impeller (4) that attach
the scraper (5) to machine.
4. Remove the worn scraper (5).
5. Install the new scraper (5).
6. Install and tighten the screws (15) that you removed.
9.3

REPLACE THE IMPELLER

1. Remove 6 screws on the right side cover.
10
15
15