Environmental Protection; Declaration Of Conformity - Worx WG772E Manual De Instrucciones

BLADE BALANCING (See Fig. M)
To check the balance of the blade, place the center
hole of the blade M-1 on a nail or screwdriver shank
M-2 that is securely clamped horizontally in a vice
M-3. If either end of the blade rotates downward,
file that end. The blade is properly balanced when
neither end drops.
BLADE MAINTENANCE (See Fig. N1, N2)
Replace your metal blade after 50 hours of use or
2 years, whichever is the sooner-regardless of the
condition.
To remove and replace the blade, you will need
garden gloves (not provided) and a spanner wrench
(not provided) to remove the blade. Hold the blade
(15) and unscrew the blade bolt (13) counter-
clockwise using a spanner wrench, and then remove
blade (15) and fan (14) (See Fig. N1).
To re-assemble, position the blade (15) and fan (14)
with the cutting edges towards the ground (See Fig.
N2). Then securely tighten the blade bolt (13).
STORAGE: (See Fig. O1, O2, O3 )
Stop the mower and always remove the safety key.
Clean the exterior of the machine thoroughly using
a soft brush and cloth. Do not use water, solvents
or polishes. Remove all grass and debris, especially
from the ventilation slots.
Turn the machine on its side and clean the blade
area. If grass cuttings are compacted in the blade
area, remove with a wooden or plastic implement.
Store the machine in a dry place. Do not place other
objects on top of the machine.
To aid storage, press the handle quick adjust lever
(10) and fold the handle bar (9) to the position as
16 16
shown in Fig. O1. Then the mower could stand to
save space (See Fig. O3).
ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with
your local authorities or retailer for recycling advice.
Cordless Lawn Mower
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Konrad-Adenauer-Ufer 37
50668 Köln
Declare that the product
Description WORX Cordless Lawn Mower
Type WG772E WG772E.9 (770-789-
designation of machinery, representative of
Cordless Lawn Mower)
Function Mowing grass
Complies with the following Directives,
2006/42/EC, 2014/30/EU, 2011/65/EU,
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC
Conformity assessment procedure as per Annex VI.
Measured Sound Power Level
88dB(A)
Declared Guaranteed Sound Power Level
92dB(A)
The notified body involved
Name: Intertek Testing & Certification
Ltd(notified body 0359)
Address: Davy Avenue, Knowlhill, Milton
Keynes, MK5 8NL
Standards conform to,
EN 60335-1 EN 60335-2-77
EN ISO 3744 EN 55014-1
EN 55014-2 EN 62233
The person authorized to compile the technical file,
Name Russell Nicholson
Address Positec Power Tools (Europe)Ltd, PO
Box 6242, Newbury, RG14 9LT, UK
Suzhou 2016/11/30
Allen Ding
Deputy Chief Engineer, Testing & Certification
EN