Table of Contents
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few minutes to review this manual before you start
installation. If you encounter any installation or performance problems, please don't hesitate to contact us. Our
phone numbers and website are listed on the back cover. Thanks again for choosing Kohler Company.
Before You Begin
CAUTION: Risk of injury or product damage. Unframed tempered glass should not contact hard surfaces or
it may shatter. Do not touch the edge of the tempered glass panel with tools or any hard objects. Do not set
unframed tempered glass directly on the floor.
CAUTION: Risk of injury or product damage. Tempered glass cannot be cut.
- Before starting the installation, lay out and identify all of the parts. Inspect them for damage.
- The shower receptor should be installed and prepared at this time, including the finished wall materials.
- Two hex wrenches, 5/32" and 5/64", are supplied. A 7/64" drill bit is also supplied.
- The door can be installed in a right or left side configuration.
Recommended Tools and Materials
Safety Glasses
Measuring Tape
Drill & 1/4" Drill
Bit
E
1011451-2-
. . . . . . . . . . . . . . .
. . . . . . . . . . . . . .
. . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
. . . . . . . . .
. . . . . . . . . . . . . . . . . .
Pencil
Assorted Screwdrivers
2
2
2
3
4
5
6
7
8
9
10
11
12
Level
Silicone Sealant
2
Plus:
Drop cloth
Miter saw or hack saw
Fine flat file
Utility knife
Kohler Co.