Tamerica TPI-4900E Manual De Usuario página 15

Settings
4. The TPI-4900E offers two measurement options — inches or mm. Since the U.S. uses the Impe-
rial System of measurement, the cutter will default to "Inch" which will be indicated by way of
the illuminated key until you change your measurement selection. NOTE: You will have to re-
start the cutter when changing the unit measurement via the main switch or emergency stop
switch to effect the change.
5. The RESET key is used in the event the cutting blade, paper clamp or both do not retract. An
easier way to do this would be by way pressing the Paper clamp Up/Down switch (see page 5 & 6)
which can also be used to make the blade retract.
- 15 -