Operating Instructions - Turbosaver TS-1100 Manual De Usuario

and dry or replace it when it is distorted or broken.
5. Sealing strip: silicone bar, used to press the bag firmly on the sealing element.
6. Hook: To lock the lid to the base.
7. Heating Element: Teflon-coated heating element that is hot and seals the bag. Place the
bag to be sealed on this sealing element.
8. Lower packing: keep the air away by forming a vacuum chamber with the upper seal in
the vacuum chamber. Clean and dry or replace it when it is distorted or broken.
9. Release button: two provided. Press both buttons to open the cover and release the
vacuum pressure inside the machine.
10.SWITCH: turn off the heating circuit. Open the lid, the heating element will not work.

OPERATING INSTRUCTIONS

I. Make a bag from a bag roll
1. Connect the unit to a power source
2. Use scissors to cut a bag of
Rolls of bags to the length you want.
3.Put one end of the bag over the seal
Strip, but do not enter the void.
4. Close the top cover and press firmly
until you hear it in its place on both sides
5. Press the sealing button to start
to seal bags
6. When the sealing program is completed,
Press the release button to open the lid.
and take out the bag from the machine.
16