Supplied Accessories; Product Description; Performance Characteristics - Tenveo NV10A Manual De Usuario

Attention
1. Foreword
Thanks for choosing our NV series conference cameras.Please read this manual carefully before using the product.
2. Notice
To avoid damage from stress, violent vibration, soaking during transportation,storage and installation.
·
·Take care of each components of camera during installation, and install camera at where is affordable enough, to avoid drop or
scratches of camera case.
·Handle the camera parts gently, do not squeeze the camera units hard. Please do not touch the camera lens by hand directly to
avoid the lens scratched and image quality affected.
·Do not apply excessive voltage. (Use only the specified voltage) Otherwise, you may get an electric shock or a fire occur.
·Do not aim the camera at the sun or the other high luminous objects,otherwise it may cause image blurring or lens flare, even
cause permanent damage to the camera.
·Do not clean camera with active chemical or corrosive detergents,and remove dust or dirt on the surface of the lens with a
blower (Commercially available)
·Do not disassemble any camera components, in case of abnormal operation; contact your authorized dealer or the store where
you p-urchased the product.

3. Supplied Accessories

(1) HD conference camera
(5) Manual

Performance Characteristics

1. Camera technical parameters
Electric
Input Voltage
DC12V
Power 12W
Decoder internal
Operation
Horizontal Rotation +175°
Vertical Rotation
90°
Rotation Speed
100°/s
Physics
Preset Point: 9 for remote
Preset Point control,255 for PELCO,64
for VISCA
Net-Weight
(2) DC12V power supply
(6) Remote control
Baud
Protocol
Address Set
Operating Environment
-
Operating Temp
1.46kg
(3) Ceiling mount
(7) USB cable
Communication
Surroundings
Installation Method
Support desktop,wall mount,ceiling mount and tripod installation
1
(4) Mounting screws
9600/38400bps
VISCA/PELCO-D/PELCO-P
0~64
0°~+50°
0~95% non-condensing