Publicidad
English
The R-100200 is a practical electro-
vibrator unit specially designed for compacting
materials
for
the
mechanics
sectors.
performance from the unit, we recommend you
read the following instructions carefully.
• Place the unit on a smooth, firm, perfectly
horizontal surface. The electro-vibrator is
fitted with rubber suction caps (A) to ensure
firm attachment.
• Connect the plug to a 230 V, 50/60 Hz
earthed power outlet.
• Place the cylinder or items to be vibrated on
the unit's vibration platform. In the case of
impression bowls, the mixture can also be
compacted by resting the bowl firmly on the
edge of the unit and holding down the bowl
handle with your hand.
• Adjust the vibration regulator (B) to its
minimum setting (turn the knob anti-
clockwise).
• Slowly move the unit's regulator clockwise
and check that the oscillation rate gradually
increases. Set the regulator to a suitable
amplitude for the operation.
• After a short time, once the mixture is
properly compacted, switch the unit off by
turning the regulator to the left.
MAINTENANCE AND CLEANING
To ensure a long, trouble-free service life and
performance of the unit, we recommend as
follows:
• After using the unit, always clean away any
splashes of mixture before they dry.
• Clean the vibration platform and outer
housing of the electro-vibrator regularly with
a damp cloth. The rubber cover protecting
the platform can be easily removed to
facilitate cleaning.
• As a precaution, always disconnect the unit
from the mains before cleaning it.
6
jewellery
and
dental
To
obtain
GB
PRECAUTIONS
♦ Before connecting the unit ensure that the
power supply is 230 V, 50/60 Hz and
best
earthed.
♦ Do not use the unit in wet places or close to
heat sources.
♦ Do not place easily broken containers or
other objects on the vibration platform.
♦ Do not allow children or unskilled personnel
to handle the unit.
♦ Do not pull, twist or bend the mains cable
excessively.
♦ Before cleaning the unit, ensure that it is
unplugged.
♦ Never immerse the unit in liquid when
cleaning it.
♦ Do not place hot containers or objects on
the vibration platform, as this may damage
the rubber.
TECHNICAL CHARACTERISTICS
Voltage:
Dimensions:
Power:
Weight:
230 V, 50/60 Hz
Ø127 x 90 mm
110 W
1.6 kg
Publicidad
