Frame; Front Wheel; Rear Wheel - Be Cool bi-baby Manual Del Usuario

A. FRAME
Unpack the stroller from the box and set the
A.1
wheels aside.
A.2 Unfold the stroller by pressing the Button at the
rear leg as illustrated to release main lock and lifting
the Handle-strap inside the seat to set it up.
A.3 Place the stroller in the upright position.
WARNING: Ensure that all the locking devices are
engaged before use.
B. FRONT WHEEL
INSTALLATION
B.1
Lay stroller on its back so the Handlebar is resting
on the floor.
Attach the front wheel by sliding it into the front
wheel mount until it clicks.
Gently pull on the front wheel to makesure it is
properly attached.
B.2 REMOVAL
Press release button on wheel casing and pull wheel
to remove.
SWIVEL LOCK
B.3
Raise the Swivel Lock to allow the front wheel
assembly to swivel.
Press down on the Swivel Lock to lock the front
wheel assembly in a fixed position for long distance
strolling.
C. REAR WHEEL
C.1 INSTALLATION
Back wheels are assembled by inserting the wheel
into the wheel mount until it clicks into place.
Gently pull on the Rear Wheel to make sure it is
EN
27