Three Kinds Of Alarm Function; Lock Phase Function; The Function Of The Self-Set Frequency - Ewent EW3940 Manual De Instrucciones

off automatically and protect the battery; When AC comes back, the UPS will
turn on automatically.
•
Short-circuit Protection ： when the UPS is in inverter mode and there is shock
or short-circuit, UPS will output limited currency, protecting the UPS( When in AC
mode, the UPS will be protected first by input fuse and then transfers to the
inverter working mode).

4.3 Three Kinds of Alarm Function

•
When AC fails, and the UPS supplies power, UPS will alarm once every 6
seconds and the beep stops about 40 seconds later.
•
When the battery is nearly used up, the UPS will alarm automatically and the
beep frequency is once every 2 seconds.
•
When the battery is really used up, the UPS will alarm for a very long time and
after 20 seconds, it will turn off automatically.

4.4 Lock Phase Function

In AC mode, the UPS system automatically tracks AC phase and ensures that the
output wave form of the inverter is the same with AC voltage wave form. In this way, it
reduces the peak pulse and surge voltage to minimizes the interference and damage
to the equipment.

4.5 The Function of the Self-set Frequency

When the UPS is turned on for the first time, the acquiescence frequency is 50/60Hz;
when it is connected to AC, the frequency is automatically set to 50Hz or 60Hz in
accordance with AC.
6 |
ENGLISH