Charging Your Scooter - Infiniton Boulevard EASY WAY Manual De Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

8.1 Weight Restrictions
Battery Specifications
Battery
Charging time
Voltage
Initial Capacity
Working Temperature
Charging Temperature
Storage Time
Storage Temperature
Storage Humidity
BATTERY WARING
Failure to follow the Safety Precautions listed in the Battery Warning could
lead to serious bodily injury and death. Seek immediate medical attention
if you are exposed to any substance that is emitted from the battery.
• Do not attempt to modify, change, or replace your battery.
• Do not use your scooter if the battery begins to emit odor, overheats, or
begins to leak.
• Do not touch any leaking materials, or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances, do not open the battery, or
insert anything into the battery.
• Please only use the charger provided by scooter.
• Do not attempt to charge the scooter if the battery has discharged or
emitted any substances. In that case, the battery should be abandoned
for safety.
Lithium Battery
3 hours
25.2 V
4400 mAh
-15 ℃ - 50 ℃
0 ℃ - 40 ℃
6 months
-20 ℃ - 25 ℃
5 % -95 %
• Please follow all local, state and federal laws in regards to recycling,
handling and disposing of Lithium Ion batteries.
• The scooter should only be shipped in its original packaging.
• Do not throw away your box as you need you scooter packaging for future use.

9. Charging your scooter

Step 1: Ensure that the charging port is clean and dry.
Step 2: Plug the charger into the power socket, then connect the cable with the
power supply (100V~240V; 50,60Hz), make sure the light on the charger
is lit GREEN.
Step 3: Male DC connector plug into the charging port ofthe scooter. The
indicator light on the charger should change to RED, indicating that your
scooter is now, being charged. When the RED indicator light on your
charger turns to GREEN then your scooter is fully charged. A full charge
typically occurs within 3 hours.
Step 4: Please unplug the charger from your scooter and from the power outlet.
IMPORTANT NOTES ABOUT CHARGING
If the green light on your charger does not turn RED when you plug it tinto your
scooter, it could mean you have to check the cables to ensure you have a
proper connection; or that your scooter is already fully chaged. Push and hold
your power button next to the charging port to check the status of your battery
in the display.
• Do not overcharge, as this will affect the life of the battery.
• The best charging temperatures are between 0°~40°. Extreme cold and
extreme heat will prevent your battery from charging fully.
• Make sure to unplug your charger before standing on or operating you
scooter, as this can be very dangerous.
• Use only the scooter charger that you received in your box.
• If the scooter is powered on when you enter the plug, the Battery Indicator will
begin blinking, if the scooter is powered off when you enter the plug,
the Battery Indicator will not blink.
07

Publicidad

Tabla de contenido
loading

Tabla de contenido