Giatsu RA1A Manual De Usuario página 27

Buttons on remote controller
The minimum cooling temperature setting
In the off mode,pressing "TEMP"and "-" button at the same time,the LCD will display the
minimum cooling temperature.The default temperature is 16°C and you can adjust the
temperature with "+" or "-" from 16°C to 31°C, 3 seconds later it will return to the standby
mode.
The maximum heating temperature setting
In the off mode,pressing "TEMP" and "+" button at the same time,the LCD will display the
maximum heating temperature.The default temperature is 31°C and you can modulate the
temperature with "+" or "-" from 16°C to 31°C, 3 seconds later it will return to the standby
mode.
Low temperature heating function setting
● In heating mode, pressing "Mode" and "+" button at the same time will enter/exit the low
temperature heating function.
● "LA" would be showed on the remote controller after entered into the low temperature
heating funtion.
● When switching from one mode to another mode, low temperature heating function was
canceled. Turn off and then turn on air conditioner that will remain the low temperature
heating function. After powered on, the low temperature heating mode was default to off
status.
● In the low temperature heating mode, "SLEEP" and "Low temperature heating" function
cannot start at same time.When low temperature heating mode has already started,
meanwhile you press the "SLEEP" button, the air conditioner will exit low temperature
heating mode and enter the sleep mode. Vice versa.
Note:
1. In the low temperature heating mode, the fan speed was default to Auto and non-ajusatable.
2. In the low temperature heating mode, "TURBO" and "QUIET" can't be set. If enter the low
temperature heating mode, the turbo and quiet function that started before will be canceled.
As well as when exit the low temperature heating mode, it will not resume .
3. When exit from the low temperature heating mode, the speed and temperature will turn
into the original condition before it started.
4. You can set up other function.
10