How To Operate; Helpful Tips; Cleaning & Maintenance - Nostalgia Products MLKS100COKE Manual De Instrucciones

HOW TO OPERATE

1. First, find a stable surface near an electrical outlet. Make
sure the cord is away from any water source.
2. Set the Control Switch to "O" and plug the cord into the electrical outlet.
3. Place ingredients to be mixed into the Blending Cup.
NOTE: Ensure that the ingredients do not exceed the 450 mL indicator line.
4. Attach the Blending Cup to the milkshake maker by pressing the lip of the Blending Cup up
to the Cup Support/Micro Switch and push up, then rest the bottom of the Blending Cup on
the notch of the Cup Rest.
NOTE: The Cup Support/Micro Switch must be engaged in order for the unit to work.
5. Toggle the Control Switch to "I" to begin mixing at low speed. If desired, for the
final stage of mixing, toggle the Control Switch to "II" to mix at high speed.
6. When mixing is complete, set the Control Switch to "O" and remove the Blending Cup.
7. Pour the mixture into your desired serving container, and enjoy!

HELPFUL TIPS

Mixing
• For best results, always add wet ingredients to the mixing cup before
adding any dry ingredients. This will prevent the dry ingredients
from sinking to the bottom of the blending cup.
Texture
• For best results, ensure that all ingredients are as cold as possible before mixing. Drinks
made with ice cold milk will mix thicker and frothier than if warmer milk is used.
• Do not use whole fruits when mixing. Mashed or pureed fruits work best.
Other Uses
• This appliance can also be used to mix thin batters and eggs.
CLEANING & MAINTENANCE
1. Make sure the 2-Speed Control Switch is turned off (O) and the unit is unplugged.
2. Carefully wipe the Electric Motor, Mixing Wand and main unit with a slightly damp,
non-abrasive cloth. NEVER immerse the Electric Motor in water or any other liquid.
3. Wash the Blending Cup in warm, soapy water and dry thoroughly.
4. DO NOT use harsh or abrasive cleaners.
5. DO NOT place any parts in a dishwasher. Hand wash only.
6