Special Features
Front view
Clean water/solution tank
Looking at the front of the unit, the clean water/
solution tank is on the right side.
Automatic Smart System™ control paneI
Located on top of the unit, you will find the
control panel. Select the cleaning cycle you
would like to use (detailed instructions on
page 6).
Dirty water/collection tank
Looking at the front of the unit, the dirty water/
collection tank is on the left side.
Vacuum flex hose
Wraps around the center of the unit, and serves
as the travel path for dirty water and formula
suctioned into the dirty water/collection tank.
Spray trigger
When cleaning in the manual mode, press the
spray trigger to release water and formula onto
the area to be cleaned.
Underside view
Handsfree cleaning brushes
Provides cleaning action when using the surface
stain or set-in handsfree cleaning cycles.
Deep Reach™ Technology
Water and solution are dispensed here when
cleaning in the handsfree mode. Deep Reach
Technology delivers solution further into
the carpet where the deepest part of the
stain resides.
Suction nozzles
Provides suction path when using the
handsfree cleaning cycles.
Back view
Cleaning window
Provides an area to see the handsfree
cleaning action.
Tough Stain Brush™ Storage
The Tough Stain Brush is conveniently stored
on board.
Power cord
Has a three-prong plug stored on the back
of the unit, around the oval cord wraps.
NOTE: Unwrap power cord
completely before operating the unit.
WARNING
Do not plug in your vacuum cleaner until
you are familiar with all instructions and
operating procedures.
www.BISSELL.com
5